3 Possible Reasons Your Kitchen Faucet Has Low Hot Water Pressure


If the hot water in your kitchen sink isn't as powerful as the cold water, the problem might be with a clogged faucet, or the problem could be with the water heater or plumbing pipes. You may need a plumber to narrow down the source of the problem, but here are three causes to consider.

1. There Could Be A Clog In The Faucet

Test all the faucets in your house. If the only faucet that has low pressure is the kitchen faucet, the problem might be with the faucet itself. If the cold water has low pressure too, the problem might be a clogged aerator on the end of the faucet. In that case, you can unscrew it and soak the aerator in vinegar to get rid of scale buildup.

Otherwise, you may need to take the faucet apart to clean out scale. Or, you may just want to replace the hot water side of the faucet. If you're not comfortable working on your plumbing, call a plumber. By calling a plumber, you'll also be able to verify the faucet is the source of the problem, because the problem might also be the hot water line leading to the faucet.

2. The Water Heater Has Sediment

Problems with the water heater can cause all the hot water faucets to have low pressure. This can happen when the tank has too much sediment from hard water scale, rust, and other debris that's in your water. Flushing the tank gets rid of the debris inside so your water heater can work optimally again.

3. The Hot Water Pipes Are Corroded

If cleaning out the water heater doesn't help, the problem might be in the hot water pipes that lead from your water heater and spread to your faucets. Old plumbing can corrode, and the rust and minerals from hard water can build up inside the pipes and create clogs that slow water down. This reduces the force of water as it comes out of the faucet.

If old pipes are the problem, your plumber might recommend putting in new pipes. While that is one of the more expensive plumbing services, if your pipes are old and corroded, they could burst and start leaking at any time. It's better to replace pipes when they have damage that can't be repaired or you might have to deal with a plumbing emergency later.

When all the cold water faucets have normal water pressure while the hot ones don't, that helps the plumber rule out some problems, such as a broken pressure regulator valve. Whatever the problem, a plumber can track it down and make repairs so you have a strong stream of water for kitchen duties again.

Click here for more info on plumbing services.

About Me

Learning To Program My Thermostat

Last summer, I realized that I didn't have the money anymore to keep paying steep power bills. My budget was stretched paper thin, and I was worried about how to make ends meet. One day, it occurred to me that the problem might stem from my air conditioning unit. I went outside and noticed that the sides were really clogged with dead leaves, dirt, and debris. I called my friend, who works as an HVAC contractor, to find out how to fix the problem. This blog is filled with articles about how to keep your HVAC system clean and perfect, so that you don't have to worry about a failing system.

Latest Posts

20 November 2020
If the hot water in your kitchen sink isn't as powerful as the cold water, the problem might be with a clogged faucet, or the problem could be with th

19 October 2020
As we're getting into the colder months, many people will be turning on their furnaces for the first time. When they do, they may notice a series of b

17 September 2020
When they're working perfectly, air conditioning units barely even let you know they're there. They might hum once they kick on and pass a gentle bree